Do you want to improve your room’s standard? Are you searching for the most inexpensive ways to decorate your bedroom? Do you want to learn how to texture a wall with a roller? 

Texturing a wall is an inexpensive way to add a unique and interesting finish to your rooms. This is often applied out of necessity and commonly used to decorate interior wall surfaces. However, just make sure that you are taking only one step at a time. 

The best part about doing the wall texture all by yourself is featuring your unique style. And on top of that, you will save lots of your hard-earned money. Nevertheless, you need to learn first how to texture a wall in detail, and then you can follow the steps for your own sake.

How To Texture A Wall With A Roller – Step By Step Methods 

Wall texture is a material that is thicker than paint but more fragile than drywall compound. There are various types of texture paint such as orange peel texture, popcorn texture, knockdown texture, sand texture paint, smooth texture paint, etc., that you can apply on your wall.

This is generally applied to hide all the minor repairs that exist on your wall. At the same time, this saves you lots of time, effort, and money. 

Things You Need To Texture A Wall

Things You Need To Texture A Wall

Some equipment and materials that you need to texture your wall are listed below:

  • Paint tray
  • Paintbrush
  • Paint
  • Drywall prime or flat paint
  • Drywall compound 
  • Painter’s tape
  • Paint roller and cover
  • Drill and paint mixture attachment 
  • 5-gallon bucket
  • Drywall knife
  • Plastic sheeting
  • Drop cloths

Now, let’s learn all the major steps on how to texture a wall with a roller in 2021.

1. Protect The Area

Texturing walls can ruin your bedroom because of the materials that are used in this process. Even professionals cover the floor so that if small amounts of paint fall, your floor will remain completely protected.

This is the reason why you need to cover the floor before starting to texture a wall. You can use either clothes or plastic sheets, whatever is comfortable for you.

2. Patch The Surfaces

Another step is to patch the surfaces. Prior to the stippled surface, you need some patching of wall and ceiling surfaces. Smoothing your wall with drywall is fine. Patch holes with drywall compound and lightweight spackle.

This takes very little time and there is no need to spend more time than it is necessary. It is because it will get covered with the texture material. Now, follow the other step to know how to texture a wall.

3. Prime The Surface

Now, it’s time to apply a coat of drywall primer. Let it dry. This is one of the most vital steps that you need to do very carefully because the texture paint is applied directly.

Soon, you will see that drywall is absorbed into the wall surface. Also, there is no need to compromise your efforts at any cost. 

4. Mix The Texture Compound

Here, you need to use your own creativity to create wall texture material. This saves you money that you can spend on some other projects.  Mix the texture compound thoroughly by using a 5-gallon bucket.

On the other hand, if you wish you can buy a premixed texture pain. Now, it’s time to blend the mixture properly to make it smooth.

5. Roll Out The Wall Texture

After following the above steps on how to texture a wall’ you can start with rolling out the wall texture. In this process, the toughest part is maintaining everything on time.

Immediately fill the paint tray with the texture paint or texture material. Then, it’s time to roll it out and apply the textured wall over the surface. This will create a good feeling whenever someone enters your room.

6. Reach Tight Areas With A Brush

It is obvious that a roller cannot reach all the edges or corners of your room. Here, you need a paintbrush to complete the remaining part by the material.

However, no need to use a roller to cover the edges if you don’t have a brush. A paintbrush is already instructed to you at the beginning of how to texture a wall.

7. Let The Texture Dry

Don’t touch the texture as soon as you painted it. Let it dry for some time. Also, don’t let anyone entering your room or the area where you have textured your wall.

After some time, you can test the wall with your thumb. Then, you will know instantly that the wall is dried or not.

8. Texture Again

What? Texture again? Yes, you need to texture your wall again. The first texture is just to reach the desired consistency. Now, the second texture is to create 3D texture.

Moreover, like the above steps, you can use a paintbrush to cover all the corners or edges.

9. Paint Homemade Texture

The last step on how to texture a wall is to paint homemade texture. Consider primer for texturing a wall because drywall mud is chalky and sucks the moisture out of paint.

The best part is that primer is cheap and gives a finishing look to your beautiful walls. 

Are You Ready?

Now, there is no need for a professional to texture your wall because you can do it by yourself. You can follow all the above-listed ways on how to texture a wall with a roller step by step. Just watch the magic of this texturing and you can thank me later with your comments!

Read Also:

Nisha Jaiswal
Nisha Jaiswal is a Traveler by passion and a Content Writer by profession. She is one of a Content Editor at FollowTheFashion, OnlineHealthMedia, and DreamLandEstate. She loves to write articles on Fashion, Beauty, Travel topics, Real Estates, etc. She is also a freelance writer who writes SEO friendly content.

You may also like

Leave a reply

Your email address will not be published. Required fields are marked *

More in Home Design