When it comes to construction work, safety is of the utmost importance. One important aspect of safety on a construction site is the use of proper protective gear, and one essential piece of gear for any contractor is a good pair of work gloves.

There are many different types of work gloves available for contractors to choose from, each designed to protect against specific hazards. In this article, we will discuss the different types of work gloves available and the hazards they can help protect against.

First, let’s start with the most basic type of work glove: the standard leather work glove. These gloves are made from cowhide or pigskin leather and provide a good level of protection against abrasion and cuts. They are also resistant to heat and sparks, making them a good choice for welding or other tasks that involve heat.

Next, we have cut-resistant work gloves. These gloves are designed to protect against cuts and lacerations and are often made from materials such as Kevlar or Dyneema. They are ideal for tasks that involve sharp objects or tools, such as cutting drywall or working with sheet metal.

Another important type of work glove for contractors is the impact-resistant glove. These gloves are designed to protect the hands from impacts and vibrations and are often made from materials such as rubber or thermoplastic rubber. They are ideal for tasks that involve heavy tools or equipment, such as operating a jackhammer or working with heavy machinery.

For work that involves electrical hazards, electricians’ gloves are a must. These gloves are made from materials that insulate against electricity, and often have a rubber outer layer to protect against electrical shocks. They are an essential piece of protective gear for electricians and anyone working with electrical equipment.

For work that involves chemical hazards, chemical-resistant gloves are a good choice. These gloves are made from materials that are resistant to a wide range of chemicals and can help protect against skin irritation and chemical burns. They are essential for tasks such as handling hazardous materials or working with cleaning chemicals.

Finally, for work that involves cold temperatures, insulated gloves are a good choice. These gloves are designed to keep the hands warm and protected from the cold and are often made from materials such as Thinsulate or other synthetic insulation. They are ideal for tasks that take place in cold environments, such as working outside in the winter or in refrigerated environments.

In addition to protecting against specific hazards, work gloves can also help prevent more general injuries such as hand fatigue and blisters. They can also provide a better grip on tools and equipment, helping to reduce the risk of accidents and injuries.

Importance of Safety On Construction Site

Construction Site

It’s important to stress the importance of safety on a construction site. Construction work can be dangerous and even deadly if proper precautions are not taken. Every year, thousands of construction workers are injured or killed on the job, and many of these accidents could have been prevented with proper safety measures.

By taking the time to choose the right type of work gloves and other protective gear, and by following safety guidelines and procedures, contractors can help ensure the safety of themselves and their workers on the job.

Additionally, proper safety measures can help prevent accidents and injuries, which can lead to costly lawsuits, lost productivity, and damage to a company’s reputation. Investing in safety on the construction site is a must for all contractors, and it’s important to prioritize it always.

Types Of Gloves For Construction Safety

Types Of Gloves For Construction Safety

Hand accidents are widespread when it comes to construction sites. Hand accidents account for about 40 to 60 percent of the total recordable work accidents. Therefore, selecting a pair of gloves is essential when it comes to saving your hands when you are working at a construction site.

But how can you be sure that you are using the right type of glove? If used in a wrong way, they will not serve the purpose and will not give you any protection. Here are some of the gloves and their uses as far as the work is concerned.

Cotton Fabric Gloves

This is one of the most common types of gloves that is mainly used for general projects or works where you will not be needing a high level of protection. These gloves are thin and offer a lightweight covering of fabric that provides very little safety to the users. They are mostly used to prevent those minor splinters or scraps but cannot give any protection against burns, cuts, or punctures.

Coated Fabric Gloves

These are just a step above the non-coated fabric gloves. They are good at providing just a little more protection against chemicals, cuts, and punctures. PVC, Nitrile, and Polyurethane are some of the common types of coatings; however, which one would work the best would depend on what job you would need it for.

Leather Gloves

Leather gloves are very preferable for quite a few reasons. They have a good grip while at the same time are durable and provide good insulation. They are thicker as compared to regular fabrics and, therefore, offer a great level of protection.

Kevlar Gloves

Kevlar gloves are extremely durable and, hence, are the perfect options when it comes to industrial work. These materials are lightweight and yet are a robust solution for hand protection. It allows movability and, at the same time, remains firm under duress. Kevlar is resistant to puncture and cuts and is mostly used as a lining for other different types of gloves.

Vibration Resistant Gloves

Prolonged vibrations are something every construction site worker has to go through. This is becoming quite concerning as the days pass by. Fortunately, there are vibration-resistant or impact-resistant gloves that help reduce the impact caused by prolonged vibration. These gloves absorb most of the impact of the vibrating equipment and tools so that very little energy passes to the hand. They are very common in the automotive, fabrication, and construction industries where workers tend to use vibrating equipment for extended time periods.


In conclusion, as a contractor, it’s important to have the right type of work gloves for the job at hand. By choosing the right type of glove for the task, you can help protect yourself and your workers from a wide range of hazards, including cuts, lacerations, impacts, electrical shocks, chemical burns, and cold temperatures.

A good pair of work gloves can be a small investment that can make a big difference in terms of safety on a construction site.


Sumona is a persona, having a colossal interest in writing blogs and other jones of calligraphies. In terms of her professional commitments, she carries out sharing sentient blogs by maintaining top-to-toe SEO aspects. Follow her contributions in SmartBusinessDaily and RealWealthBusiness

You may also like

Leave a reply

Your email address will not be published. Required fields are marked *

More in Advice